SmartMesh OEM Module Industrial Wireless Communication

Main features of SmartMesh Wireless Broadband MESH:

RF performance:

• One button boot, set up anywhere.Long distance, high throughput
• Anti interference COFDM / broadband carrier frequency hopping can improve link quality in complex RF environment
• Excellent multipath and NLOS performance
• Adaptive radio modulation from QPSK to 64QAM is continuously optimized per packet to optimize link performance in dynamic environments
• Software defines channel sizes for efficient reuse of spectrum
• The software defines the operating frequency of the global application
• Convolution coding, forward error correction (FEC), ACK retransmission, maximum ratio merge, spatial multiplexing, and space-time block coding are
• used for robust data transmission over noise spectrum
• Time Division Duplex (TDD) for Bidirectional Transmission

Network performance:

• Self-organizing, self-healing mobile Mesh networks, multi-hop routing, dynamic topology
• Ultra-Reliable Low Delay Channel for Command and Control (URLLC)
• Optimizing video streaming media channels on the same wireless link
• End-to-end IP architecture for unicast and multicast traffic
• Data transmitted over the air can be encrypted with up to 256-bit AES
• ake advantage of the most advanced and scalable OpenWrt ecosystem
• Embedded network management APIs

Other:

• Small Size, Light Weight, and Low Power-Low Cost(SWAP-C) for Mobile Device Applications
• Ethernet and UART interfaces can be easily integrated into different system architectures
• Rugged earthquake-resistant construction, industrial temperature range

OEM Module Specifications

General
Waveform/SDR Platform	Mobile Network MANET/9363 or 9361+7Z020
MIMO Technology	Space-time coding,Receive Diversity,TX /RX beamforming
Receive Sensitivity	-103dBm@5MHz BW
Channel Bandwidth	1.25/2.5/5/10/20MHz optional
Data Rate	1-70Mbps(10MHz BW) Adaptive,QoS
Modulation Mode	TD-COFDM,BPSK/QPSK/16QAM/64QAM/256QAM/1024QAM adaptive
RF Output Power (Support TPC, transmisson power control)	0.5Watts x2 1Watts x2 2Watts x2
Single Hop Communication Distance	Air to G. 10~30KM (0.5Watts x2)
Mode	Point-to-point/Point-to-multipoint/Multipoint-to-multipoint,Automatic relay,Star/Line/Network/Hybrid
Single Hop Delay	Average 7mS(20MHz BW)
Encryption	DES, AES128/256,Chip /TF card encryption customized
Anti-jamming Mode	Manual spectrum scanning channel selection, Intelligent frequency channel Selection/Autonomous frequency hopping/Roaming mode optional
Local/Remote Management	Operating frequency, channel bandwidth, network ID, transmit power and other parameter settings, spectrum scanning, real-time display and statistical records of network topology, link field strength signal-to-noise ratio, upload and download traffic, GPS/Beidou electronic map, temperature/voltage/interference Monitoring, software upgrade
Others	The startup time is less than 30 seconds, and the network access/update/switchover time is less than 1 second.There is no limit on the user capacity of a single system and the number of hops in Mesh networks. The total bandwidth loss of multiple hops is less than 70%.Automatic carrier tracking, support over 800 km/h mobile communication
Bands(70M-6GHz. 2T2R at single band, or 1T2R at dual band selectable/smart change*)
BAND	Frequency range
UHF	430-550/570-700/800-950, 225-400/320-470*MHz
L Band	1000-1200/1300-1500/1600-1800/1800-2000, 1200-1700*MHz
MIIT	336-344/512-582/566-626/606-678/1420-1520/1430-1444MHz
S Band	2.0-2.2/2.2-2.5/2.5-2.7/2.7-2.9, 1.6-2.3/1.9-2.7*GHz
C Band	4.4-5.0/5.25-5.85, 4.2-5.2/5.5-6.0*GHz
Environmental
Operation Temperature	-40℃ ~+80℃
Protection Level	IP66,IP67/IP68 Customized
Mechanical
Size/Weight	8.7×5.4×1.0cm/40g (1Watts×2 Module) 9.7×5.4×1.0cm/60g (2Watts×2 Module) 6.2x4.8x1.0cm/50 (Mainboard 25)g (0.5Watts×2 Module, SM-mini)
Installation/Color	4 Mounting Holes/Black,Lron Gray,Army Green Optional
Power
Supply Voltage	9-32VDC (0.5Watts×2) 9-39VDC (1Watts×2) 12-36VDC (2Watts×2)
Power consumption	Operation 0.3-0.5A/Standby 0.2-0.3A@12V(0.5Watts×2) Operation 0.5-1A/Standby 0.4-0.6A@12V (1Watts×2) Operation 1-2A/Standby 0.5-0.7A@12V (2Watts×2)
Power Selection	Power Supply by Twist-Lock Battery or Main Cable
Interface
Basic interface	J1 (DC input),J2 (serial port 0, serial port 1 RS-232 level),J3(Ethernet service, data channel)
Push to talk/Auxiliary interface	MIC, SP, PTT, GND/1xRS485,1xUSB2.0 OTG
Network Extension	4G-5G Public Network Routing/WB-NB integration /LTE, Satellite, Fiber
Video Extension	Low Delay HDMI/SDI/CVBS, 4K/2K/1080P/720P/D1
Link Status Indicator	Steady red - The network is not connected Blinking red - Starting/not connected to the network Steady green - The network is connected Blinking green - Voice PTT is down
RSSI Link Indicator	Steady green - The link quality is excellent Blue Steady - The link quality is good Steady yellow - The link quality is medium Steady purple - The link quality is slightly worse Steady red - The link quality is poor or link is down
Management Interface/Control Interface	Web-based network management/GUI, API secondary development interface/SNMP

Model Name:

Accessories: Options:

Product Tags:

SmartMesh mimo module

      

Industrial mimo module

      

Wireless mesh module

      

SmartMesh OEM Module Industrial Wireless Communication Images